点击图片查看大图
Everlube 6102G is a thermally cured, PTFE/MoS2 based solid film lubricant with a high molecular weight
phenolic binder system. This coating enhances the torque/tension relationship in fasteners applications,
which allows for a tighter clamp loads and less variability. Everlube 6102G is purchased by a wide variety
of markets, ranging from Automotive to Medical.
Color and Appearance:* Satin Black Finish
Markets Typical Applications
Physical Properties
• Automotive
• Medical
• Fabricated Metal Parts
• Fasteners
• Small to medium fasteners
• Surgical instruments
• Mandrels, castings, and stampings
• Springs, coils, and clamps
Dry Film Thickness 0.3 to 0.8 mils (8 to 20 microns)
Processing Information²
Cure Cycle:² 1 hr @ 300°F +/- 25°F
PTFE, Solid Film Lubricants
Product Descript ion
U.S.A. 1-800-428-7802 · 1-770-261-4800
Europe 44 (0)1386 421444
www.everlubeproducts.com
Theoretical Coverage:¹ 604 ft²/gal @ 0.5 mils (14.7 m²/liter @ 12.7 microns)
Volatile Organic Compound: 680 grams/liter (5.67 lb/gal)
Flash Point: 24°F (-4°C)
Density:* 8.3 ± 0.5 lb/gal (995 ± 60 grams/liter)
Solids (by weight):*
32% to 36%
Dilution / Cleanup Solvent:² MEK, 50/50 Ethanol/Toulene, or 600 Solvent
Dilution Ratio: 1:1 to 1:3 (Product to Solvent)
Carrier: Solvent Borne
Binder: High Molecular Weight Phenolic
For additional information, please see Processing Bulletin # 3000-A
Suggested Pretreatment: Grit Blast and/or Phosphate
Dip Spin
Spray
Suggested Application Methods:
Lubricating Solid: PTFE, MoS2
Alternative or Repair Coatings: A low VOC alternative coating for Everlube 6102G is our Everlube 9502.
Everlube® 6102G
Technical Data
Features / Benefits
• Very good wear life
• Good color and processing flexibility
• Suitable for Medical ISO 10993 bio-compatibility testing
• Very good corrosion and chemical resistance